Modelik

Modelik 10_16 Niemiecki lekki kr±¿ownik z I wojny ¶wiatowej SMS GRAUDENZ

Niemiecki lekki kr±¿ownik z I wojny ¶wiatowej SMS GRAUDENZ - Image 1
Asteikko: 1:200
Valmistaja: Modelik
Tuotekoodi: mod10_16
Nykyinen saatavuus: ei saatavilla
Viimeksi käytetty: 3.11.2023
€18.40 tai 10400 kohta

Sisältää 24% arvonlisäveron
maan sisäisiä kuljetuksia varten: Suomi
Voit vaihtaa maata klikkaamalla tästä

Jos tuote ei ole tällä hetkellä saatavilla, kirjoita sähköpostiosoitteesi alle ja saat automaattisesti ilmoituksen, kun se tulee myyntiin!

Voimmeko tuoda tuotteen, jota ei ole verkkosivustolla tai jota ei ole saatavilla?

Perustiedot

ValmistajaModelik
Tuotteen koodimod10_16
Paino0.26 kg
Asteikko1:200
Lisätty luetteloon:16.6.2016
TunnisteetSMS-Graudenz

SMS Graudenz was a German light cruiser of the First World War. The keel for this unit was laid in 1912, the launch took place in October 1913, and entry into service in Kaiserliche Marine - in 1914. The length of the ship was 142.7 meters and a width of 13.8 meters. Full displacement reached about 6,400 tons, and maximum speed - to about 27-28 knots. The deck armament at the time of launching consisted of 12 105 mm guns and 2 torpedo tubes. SMS Graudenz was the lead ship of the class of cruisers of the same name. Structurally, this type of unit was very similar to that of the Magdeburg class. However, they differed from them mainly in the architecture of the engine room, a slightly longer range of operation and slightly improved performance. SMS Graudenz was built at the Kiel shipyard. The unit took an intensive part in the course of operations in the First World War. She fought, inter alia, in the Battle of Dogger Bank in 1915 and - in the same year - in the Battle of the Bay of Riga. Due to the damage to the SMS, Graudenz did not take part in the Battle of Jutland. The unit happily survived until the end of the war, and in 1920 it was taken over by the Italian fleet, where it served under the name Ancona until 1937.

The models are digitally printed - some adhesives can dissolve the ink! 

Paint in digital printing can be dissolved by certain types of adhesives like butaprene and similar on the same solvents. Before bonding, it is advisable to try the adhesive used on a barely visible part of the model.

Virhe kuvauksessa? Raportoi ongelma
Asiakkaidemme mielipiteet
Lisää mielipiteesi aiheesta: Niemiecki lekki kr±¿ownik z I wojny ¶wiatowej SMS GRAUDENZ
...
Lisätty luetteloon: 16.6.2016
Nykyinen saatavuus: ei saatavilla
  • saatavilla oleva tuote
  • tuote ei ole saatavilla
  • tuote saatavilla pyynnöstä
  • tavaroiden toimittaminen
  • ei ole
  • 1 kappale
  • 2 kappaletta
  • 3-5 kappaletta
  • 6-10 kappaletta
  • edellä 10 kappaletta
Voimmeko tuoda tuotteen, jota ei ole verkkosivustolla tai jota ei ole saatavilla?