Badger

Badger 2020-2F 2020 Sotar airbrush ( size #1 ) - large version

2020 Sotar airbrush ( size #1 ) - large version - Image 1
Valmistaja: Badger
Tuotekoodi: BAD2020-2F
Nykyinen saatavuus: saatavilla!
€182.03 tai 117100 kohta

Sisältää 24% arvonlisäveron
maan sisäisiä kuljetuksia varten: Suomi
Voit vaihtaa maata klikkaamalla tästä

Perustiedot

ValmistajaBadger
Tuotteen koodiBAD2020-2F
Paino0.25 kg
Ean:047459202029
Lisätty luetteloon:20.8.2007
TunnisteetAerografy Badger-2020

Set contains: 2020 Sotar airbrush ( size #1 ) - large version, extra needle, trigger pad, finger rest, guarded regulator, wrench, mini screw driver and instruction manual in a corrugated display box.

A model airbrush double action airbrush from Badger, USA, which is offered with a 0.2mm nozzle. The airbrush has an integral (non-replaceable) reservoir with a volume of 1/12 oz, or approximately 2.5 ml. The manufacturer recommends filling it with paint to about 2/3 of its volume. It is worth adding that it has been fitted with a lid to prevent accidental paint splashing. On the other hand, it is positioned above the tool's body, which means that the paint is fed by gravity while working. On the other hand, the mixing of paint and air takes place before the head is lowered (so-called internal mixing). Like other dual-function airbrush sprayers, this tool allows simultaneous control of both the air flow rate and the amount of injected paint with corresponding movements of the trigger lever, which, among other things, makes it possible to achieve a smooth colour transition. The airbrush in question also has a mechanism for adjusting the maximum so-called 'stroke' of the firing pin located at the rear. It should also be noted that the body of the tool has been slightly lengthened by the manufacturer (if only in relation to the 105 Patriot series), which makes it fit even better in the hand, and its balance is very good. It is also very easy to remove and reinstall the trigger mechanism, thanks to the manufacturer's "Track and Winged" system. In addition, the mechanism itself is rather sensitive and susceptible to even slight movements of the finger, and its finial has been shaped to increase comfort. Another noteworthy feature is Badger's patented mounting of the firing pin in the tool's body, which allows very rapid removal and subsequent mounting (Easy Access). Also worthy of note is the fact that the manufacturer uses high-quality Teflon (PTFE) gaskets, which have an excellent service life and, above all, are not very susceptible to the effects of modelling chemicals. Nevertheless, it is recommended that it be used with paints of low density and viscosity, and thus proper attention should be paid to their proper dilution before use. On the other hand, due to the size of the nozzle (0.2 mm), the presented airbrush will prove useful above all for those airbrushing jobs that require a high degree of precision. Examples include the shading technique or the camouflage painting of multi-coloured aircraft or combat vehicles. With the right skills, it can be successfully used when painting 1:72 scale models and 1:35 scale or 54 mm (and larger!) figures. It can also be used when working with all types of dioramas or vignettes. The presented airbrush is undoubtedly a very good quality modelling tool, which, with proper use and maintenance, can serve for many years in the workshop of many modellers, especially intermediate or very advanced ones. It should be noted that the presented airbrush is offered only with a 0.2 mm nozzle, a needle dedicated to it, an integral paint container with a lid, an adapter and 2 Allen keys. The whole is housed in a handy carrying case for easy storage and possible transport. Finally, it is worth noting that it is recommended to use this airbrush at a compressed air pressure of approx. 1.05 to approx. 3.45 bar (15-50 PSI), while the optimum pressure is approx. 2.1 bar (30 PSI). Related products to the airbrush in question include: Sotar 20/20 SLIM 0.2mm, Mr. Procon Boy FWA Platinum (0.2 mm) or Aerograf Evolution CR+ 0.2.

The Model 2020, Sotar is a dual action, internal mix, gravity feed airbrush. The 2020 provides the professional illustrator with an airbrush capable of producing the ultimate in fine detail. It is more precise, more comfortable, and more reliable than any competitor. When fine line detail or the finest paint atomization for a "soft" spray pattern is required, SOTAR is the only choice. Finely pigmented properly reduced paints, watercolors, inks, dyes, and low viscosity acrylics can be sprayed with the 2020. The elongated body maintains an efficient distance between trigger and paint reservoir. The trigger and back lever assemble easily thanks to our innovative "track and winged" design.

Virhe kuvauksessa? Raportoi ongelma
Asiakkaidemme mielipiteet
Lisää mielipiteesi aiheesta: 2020 Sotar airbrush ( size #1 ) - large version
...
Lisätty luetteloon: 20.8.2007
Nykyinen saatavuus: saatavilla!
  • saatavilla oleva tuote
  • tuote ei ole saatavilla
  • tuote saatavilla pyynnöstä
  • tavaroiden toimittaminen
  • ei ole
  • 1 kappale
  • 2 kappaletta
  • 3-5 kappaletta
  • 6-10 kappaletta
  • edellä 10 kappaletta
Voimmeko tuoda tuotteen, jota ei ole verkkosivustolla tai jota ei ole saatavilla?
Mahdolliset lisäykset

Asteikko: 2020
Valmistaja: Badger
Tuotekoodi: BAD20-105
Vapautuu: saatavilla!

€11.83 tai 7600 kohta

Asteikko: 2020
Valmistaja: Badger
Tuotekoodi: BAD20-126
Vapautuu: saatavilla!

€17.57 tai 11300 kohta

Asteikko: 2020
Valmistaja: Badger
Tuotekoodi: BAD20-108
Vapautuu: saatavilla!

€10.17 tai 6500 kohta

Asteikko: 2020
Valmistaja: Badger
Tuotekoodi: BAD20-125
Vapautuu: saatavilla!

€17.03 tai 11000 kohta

Asteikko: 2020
Valmistaja: Badger
Tuotekoodi: BAD20-103
Vapautuu: saatavilla!

€13.49 tai 8700 kohta

Valmistaja: Fine Art
Tuotekoodi: FNR612
Vapautuu: saatavilla!

€2.17 tai 1400 kohta

Valmistaja: Tamiya
Tuotekoodi: tam74550
Vapautuu: saatavilla!

€7.25 tai 4400 kohta

Valmistaja: Tamiya
Tuotekoodi: tam74551
Vapautuu: saatavilla!

€6.20 tai 3800 kohta

Valmistaja: Mr.Hobby
Tuotekoodi: GUN-PS-288
Vapautuu: saatavilla!

€63.12 tai 40600 kohta

Valmistaja: Tamiya
Tuotekoodi: tam74539
Vapautuu: saatavilla!

€21.34 tai 13100 kohta

Valmistaja: Adler
Tuotekoodi: ADL-AD-7620
Vapautuu: saatavilla!

€5.55 tai 3600 kohta

Samanlaisia tuotteita

Valmistaja: Badger
Tuotekoodi: BAD150-1
Vapautuu: saatavilla!

€208.70 tai 134200 kohta

Valmistaja: Badger
Tuotekoodi: BAD100-5
Vapautuu: saatavilla!

€223.12 tai 143500 kohta

Valmistaja: Badger
Tuotekoodi: BAD2020-VM
Vapautuu: saatavilla!

€170.87 tai 109900 kohta

Valmistaja: Badger
Tuotekoodi: BAD155CS
Vapautuu: saatavilla!

€143.67 tai 92400 kohta

Valmistaja: Badger
Tuotekoodi: BAD360-CS
Vapautuu: saatavilla!

€162.71 tai 104600 kohta

Valmistaja: Badger
Tuotekoodi: BAD108-XSW
Vapautuu: saatavilla!

€161.08 tai 103600 kohta

Valmistaja: Badger
Tuotekoodi: BAD150-2
Vapautuu: 2-6 viikkoa

€208.70 tai 134200 kohta

Valmistaja: Badger
Tuotekoodi: BAD250-2
Vapautuu: 2-6 viikkoa

€33.19 tai 21300 kohta

Valmistaja: Badger
Tuotekoodi: BAD100-8
Vapautuu: 2-6 viikkoa

€129.52 tai 83300 kohta

Valmistaja: Badger
Tuotekoodi: BAD105CS
Vapautuu: mittatilaustyönä

€134.41 tai 86400 kohta

Valmistaja: Badger
Tuotekoodi: BAD155-CS
Vapautuu: mittatilaustyönä

€143.67 tai 92400 kohta

Valmistaja: Badger
Tuotekoodi: BAD1RV
Vapautuu: mittatilaustyönä

€180.40 tai 116000 kohta